Baking pan size converter
A 9x13 pan holds about the same as two 8x8 pans, and an 8 inch square holds the same as a 9 inch round. Pick your two pans to see how much to scale the recipe.

Compare by area, not by name
Two pans hold the same batter when their area is about the same. Pick the pan in your recipe and the pan you have, and get the number to multiply every ingredient by.
How to swap pans without ruining the bake
- Match the area. Use the converter or chart above. If the areas are within about 15%, swap the pan and keep the recipe.
- Watch the depth. Fill cake pans no more than two-thirds full. If the batter is deeper than the recipe intended, lower the oven by 25°F and bake longer.
- Check early. In a bigger, shallower pan, start checking 5 to 10 minutes before the recipe says.
- Glass and dark pans heat faster. Lower the oven by 25°F when you use them.
Round pan area
Area of a round pan = 3.14 × radius × radius. A 9 inch round has a 4.5 inch radius, so 3.14 × 4.5 × 4.5 = about 64 square inches. A square or rectangle is length × width.
Cupcakes from a cake recipe
A recipe for two 9 inch round layers or one 9x13 makes about 24 cupcakes. Fill liners two-thirds full and bake at the same temperature for about 18 to 22 minutes.
Frequently asked questions
Can I use an 8x8 pan instead of a 9x13?
Yes, but a 9x13 holds almost twice as much (117 vs 64 square inches). Make about half the recipe, or use two 8x8 pans.
How do I convert a 9x13 recipe to a 9x9 pan?
Multiply the ingredients by about 0.7 (81 ÷ 117). Baking time stays about the same if the batter depth is the same.
Is an 8 inch square the same as a 9 inch round?
Almost. An 8 inch square is 64 square inches and a 9 inch round is about 64 square inches, so you can swap them without changing the recipe.
How do I adjust baking time for a different pan?
Deeper batter needs a lower temperature (about 25°F lower) and more time. Shallower batter bakes faster, so check 5 to 10 minutes early.
How do I measure a baking pan?
Measure across the top from inside edge to inside edge, not the outside or the bottom.